Filter
Top Products
40
In the Infrastructure mode, you have to let the print server associate with an access point. You let the
print server scan for an available access point automatically or manually assign the SSID of the access
point you want to use.
If you select to let the print server scan for an available access point, the following window will pop up:
The list is the scanned available access points. Select an access point in the list and click “Next”. If you
cannot find the access point that you want to use, click “Scan” to let the print server scan again.
Ad Hoc Mode:
In the Ad-Hoc mode, you can let the print server automatically associate with other wireless station or
manually assign the SSID of your wireless network. You can let the print server automatically select the
channel that is the same with the peer or manually assign a channel.
If you select to let the print server scan for an active wireless station, the following window will pop up.