Filter
Top Products
39
7.10 Wireless Configuration
If you want to use the print server through wireless LAN, please set up the print server through Ethernet
first and make sure your wireless LAN setting is correct. After setting the wireless LAN, unplug the
Ethernet cable and restart the print server, then you can start to use the print server through wireless
LAN.
If the wireless configuration does not work, please plug the Ethernet cable again, restart the print server
and configure the print server through Ethernet until the wireless LAN settings are correct.
The default settings of the print server wireless function are as follows:
Mode: Ad-Hoc
SSID: Default
Channel: 11
Double Click “Wireless” icon and the wireless configuration window will pop-up.
If you use access point to build up wireless network, you have to select “Infrastructure Mode”. If you do
not have any access point and want to use peer-to-peer connection to build up wireless network, you
have to select “Ad-Hoc Mode”.
After selecting the operation modes of the wireless function, click “Next” to go to further detailed
configuration.
Infrastructure Mode: