Filter
Top Products
38
7.9 TCP/IP Configuration
Double Click “TCP/IP” icon and the TCP/IP configuration window will pop-up.
You can configure the print server to automatically get IP from DHCP server or manually specify static
IP. The print server also has a built-in DHCP server. You can enable this DHCP server and let it manages
IP for you.
Click the “IP” button to enter the IP setting page. If you need the print server to automatically get an IP
from DHCP server, select “Auto IP”. You also can select “Static IP” to manually assign “IP Address”,
“Subnet Mask” and “Gateway” for the print server.
Click the “DHCP Server” button to enter the DHCP server’s setting page. You can “Enable/Disable” the
DHCP server or set “Auto” and assign a range of IP addresses here. The DHCP server is disabled by
default. If “Auto” is selected, the DHCP Server of print server will be enabled only when there is no
other DHCP Server within the network.
When “Enable” or “Auto” is selected, you have to configure “Starting Address”, “Range”, “Subnet
Mask”, “Gateway Address” and “DNS”. The print server will assign a unique IP for each client.