Filter
Top Products
37
7.8 System Configuration
Double Click “System” icon and the System configuration window will pop-up.
In the System configuration page, you can select to enable/disable each printing or management
protocol, upgrade the new firmware for this print server, and enable/disable wireless function.
Upgrade Firmware: You can use this “Upgrade Firmware” tool to update the newest firmware of the
print server. Click “
” button and select the correct firmware in your PC. After
selecting the firmware file, click the “Upgrade” button to finish the firmware
update process. If you want to reset the Print Server to default factory settings,
please click “Load Default”.
Wireless Function: You can select “Enable” or “Disable” to manually enable or disable the wireless
function. If you manually enable wireless function, the print server’s wireless LAN
will be always enabled and Ethernet will be always disabled. If you manually
disable the wireless function, the print server’s wireless LAN will be always
disabled and Ethernet will be always enabled.
You also can select “Auto” to let the print server automatically decide to enable
or disable the wireless function. The print server only can work in ether Ethernet
or wireless LAN mode. It cannot work in both Ethernet and wireless LAN mode at
the same time. When the print server starts up, it will auto-detect if the LAN port
is connected to an active network by an Ethernet cable.
If the print server is connected to an active network by Ethernet cable when
starting up, the print server will run in Ethernet mode. If the print server is not
connected to an active network by Ethernet cable when starting up, the print
server will run in wireless LAN mode. The print server default is in “Auto” mode.
Domain Country: The wireless channels are different from country to country. Generally, the
channels are from 1 to 11 in USA and from 1 to 13 in Europe. The Domain Country
setting is for you to set the available channels according to your location.