Filter
Top Products
4. Hardware Installation
4.1. Attaching the Camera to the Stand
The Wireless Internet Camera comes with a camera stand (optional) with a swivel ball
screw head that can be attached to the Wireless Internet Camera's bottom screw
hole. Attach the camera stand to the Wireless Internet Camera and station it for your
application. There are three holes located in the base of the camera stand allowing
the Wireless Internet Camera to be mounted on the ceiling or any wall securely.
4.2. Connecting the Ethernet cable
Connect an Ethernet cable to the network cable connector located on the Wireless
Internet Camera’s rear panel, and then attach it to the network.
4.3. Attaching the Power Supply
Attach the external power supply to the DC power input connector located on
Wireless Internet Camera’s rear panel, and then connect it to your local power supply.
HINT:
You can confirm power source is supplied from the LED indicators label Power
on the Wireless Internet Camera is illuminated.
5. Security
To ensure the highest security an d prevent unauthorized usage of the (Wireless)
Internet Camera the Administrator has the exclusive privilege to access the System
Administration for settings and control requirements to allow users the level of entry
and authorize the privileges for all users. The (Wireless) Internet Camera supports
multi-level password protection and access to
the Wireless Internet Camera is strictly restricted to defined the user who has a “User
Name” and “User Password” that is assigned by the Administrator.
The administrator can release a public user name and password so when remote
users access the Wire less Internet Camera they will have the right to view the image
transmitted by the Wireless Internet Camera.
NOTE:
Since the default settings are empty, it is highly recommended to set the "Admin ID"
and "Admin Password" when you are the first time to use the (Wireless) Internet
Camera. Once the ID and Password are defined, only the administrator has the acce
ss to management the (Wireless) Internet Camera. This procedure should be done
as soon as possible since the security featur es with the (Wireless) Internet Camera
will not be enabled until the "Admin ID" and "Admin Password" is defined.