Filter
Top Products
34
Corinex ADSL2+ Wireless Gateway G Configuration
Corinex ADSL2+ Wireless Gateway G
2. Enter a unique name for the PPPoA connection in the Name field.
The name must not have spaces and cannot begin with numbers.
3. Under PPP Settings, select the encapsulation type (LLC or VC). Note: If you are
not sure just use the default mode.
4. Under PVC Settings, enter the values of VPI and VCI settings.
Note: Your DSL service provider or your ISP will supply these.
5. Select the quality of service (QOS).
Leave the default value if you are unsure or the ISP did not provide this
information.
6. Click the Apply button to complete the connection setup. This will temporarily
save this connection.
7. To make the change permanent, click on Save all settings in the left menu.
8. For connection, click on Connect.
The available PPPoE options are described in the following table: