Filter
Top Products
The communication between the access point and the wireless clients can be
encrypted with 64-bit, 128-bit or 256-bit strong WEP encryption. Select the active
key used for encryption from the 4 keys available, configure the length selecting a
value from the Cipher field and enter the key in hexadecimal (0-9, A-F) format.
The following table shows the required lengths of the WEP keys, depending on the
Cipher setting.
Cipher Key Length
64 bits 10
128 bits 26
256 bits 58
After the configuration, click Apply. To enable the new settings you will have to
restart the access point. Please go to the System Commands section in the To o l s
tab as shown below and click on Restart Access Point.
802.1x
This method uses a Radius server for authentication. After clicking on 802.1x the
following screen appears.
91
Corinex ADSL2+ Wireless Gateway G Configuration
Corinex ADSL2+ Wireless Gateway G