Filter
Top Products
75
Corinex ADSL+ Gateway G Configuration
Corinex ADSL2+ Wireless Gateway G
4.4.13 LAN Isolation
LAN isolation allows you to disable the flow of packets between up to three-user-
defined LAN groups (WLAN, USB, and Ethernet). This allows you to secure in-
formation in private portions of the LAN from other, publicly accessible LAN seg-
ments.
Follow the steps below to set up LAN isolation.
1. Check the traffic between the two LAN groups that you want to disable the
packets flow.
2. Click Apply.
4.4.14 LAN Bridge Filters
The bridge filtering mechanism provides a way for the users to define rules to
allow/deny frames through the bridge based on source MAC address, destination
MAC address and/or frame type. When bridge filtering is enabled, each frame is
examined against each defined filter rules sequentially. When a match is determined,
the appropriate filtering action (either allow or deny) is performed. Please note that
the bridge filter will only examine frames from interfaces which are part of the
bridge itself. Twenty filter rules are supported with bridge filtering.