Filter
Top Products
40
Corinex ADSL2+ Wireless Gateway G Configuration
Corinex ADSL2+ Wireless Gateway G
The following table describes the options of the PVC Settings:
Field Description
PVC Permanent virtual circuit. A fixed virtual circuit between
two users: the public data network equivalent of a leased
line. No call setup or clearing procedures are needed
VPI Virtual path identifier
VCI Virtual channel identifier. 16-bit field in the header of an
ATM cell. The VCI, together with the VPI, is used to iden-
tify the next destination of a cell as it passes through to
the ATM switch. It is sometimes called virtual channel
connection.
QoS Quality of Service, a feature of data transmission that
measures how accurately and how quickly a message or
data is transferred from a source computer to a destina-
tion computer over a network. The three QoS options are:
Undefined Bit Rate (UBR), Constant Bit Rate (CBR),
and Variable Bit Rate (VBR).
PCR Peak Cell Rate (in cells/sec) is the cell rate, which the source
may never exceed.
SCR Sustain Cell Rate
MBS Maximum Burst Size - traffic parameter that specifies the
maximum number of cells that can be transmitted at the
Peak Cell rate.
CDVT Cell Delay Variation Tolerance
Auto PVC Auto Permanent Virtual Circuit, see PVC.
Static Connection Setup
Static is used whenever a known static IP is assigned. The accompanying information
such as the Subnet mask and the gateway should also be specified. Up to three
Domain Name Server (DNS) addresses can also be specified. These servers would
enable you to have access to other web servers. Valid IP addresses range is from
0.0.0.0 to 255.255.255.255.
Use the following procedures to configure the gateway for a Static connection:
1. From the Setup main page, click on New Connection.
The default PPPoE connection setup is displayed.