Filter
Top Products
42
Corinex ADSL2+ Wireless Gateway G Configuration
Corinex ADSL2+ Wireless Gateway G
9. Select the quality of service (QOS); leave the default value if you are unsure or
the ISP did not provide this information.
10. Click the apply button to complete the connection setup. This will temporarily
save this connection.
11. To make the change permanent, click on Save all settings in the left menu.
12. For connection, click on Connect.
The following table shows a description of the Static setting options:
Field Description
Encapsulation Two options are provided: Logical Link Control (LLC)
and Virtual Channel (VC).
IP Address IP address of the static connection.
Mask Subnet mask provided by your ISP.
Gateway Your gateways IP address.
Default Gateway If checked, this connection becomes the default gateway
to the Internet.
DNS Domain Name Server address provided by your ISP.
Mode The Bridged and Routed modes are available.
The VLAN Settings include the options showed in following table:
Field Description
Sharing This is where you enable/disable sharing. The VLAN needs
to be selected to create VLAN.
VLAN ID VLAN Identification
Priority Bits Priority is given to a VLAN connection from 0-7, 0 means
highest priority.