Creative Dxr2 Computer Drive User Manual


 
Introduction xi
English
Introduction
Congratulations on your purchase of Creative PC-DVD
Encore! This guide provides you with
information on how to install and operate the PC-DVD Encore hardware and software.
Before You Begin
The README file on the Creative PC-DVD Encore diskette contains information and changes that were
not available at the time of printing. Read the file before you continue.
You may want to make a backup copy of the diskette before you begin. In addition, read the following:
System Requirements
Document Conventions
System Requirements
Miniumum system requirements for PC-DVD Encore are as follows:
A Pentium
®
100 MHz PC or compatible
16 MB RAM
8 MB available hard disk space
SVGA graphics adapter with 2 MB RAM (minimum 800x600 at 256 colors, 16-bit color support
recommended)
PCI expansion slot for the Dxr2 decoder card
Enhanced IDE connector on the motherboard or PCI interface card (bus mastering with DMA
support recommended)
Drive bay (half-height) for the Creative PC-DVD drive (drive rails may be required for some
systems and are not included)
Sound Blaster or 100 percent compatible Sound Blaster audio card (Sound Blaster 32, AWE32,
or Sound Blaster AWE64 is highly recommended)
Microsoft
®
Windows
®
95, Windows 98, or Windows NT
Dvd-fm.book Page xi Thursday, December 17, 1998 9:44 AM