Installing Software 18
Windows 98
The following instructions describe the installation of the PC-DVD drivers and software in Windows 98.
To install in Windows 98:
1. The Windows 98 Add New Hardware Wizard automatically detects the Dxr2 decoder card and
attempts to locate the driver media provided by the manufacturer. Insert the PC-DVD Encore
installation diskette and click the Next button.
2. Select the Search For The Best Driver For Your Device (Recommended) option and click the
Next button.
3. Clear all check boxes and check only the Specify a Location check box. Type or click the Browse
button and point to the driver path: D:\WINDOWS (D: represents your CD-ROM drive). Click
the Next button.
4. Click the Next button to install the Windows 98 drivers.
5. Click the Finish button when the installation is complete.
6. Restart your computer for the changes to take effect.
7. After Windows 98 restarts, insert the PC-DVD Encore CD into your PC-DVD drive.
• If the setup program does not run automatically, follow numbers 8 and 9 below.
• If the setup program does run automatically, go to number 10 below.
8. Click the Start button and click Run.
9. In the Run dialog, type D:\WINDOWS\SETUP (D: is your PC-DVD drive) and click OK.
10. Follow the instructions on screen to complete the installation.
11. Once the application is installed, remove the application CD from the PC-DVD drive and
proceed to Chapter 4, “Using Creative PC-DVD Player.”
Windows NT
The followin
g
instructions describe the PC-DVD software installation in Windows NT 4.0.
To install in Windows NT 4.0
1. Click the Start button on the Taskbar, select Settin
g
s, and click on Control Panel.
2. On the Control Panel, double-click the Multimedia icon.
3. On the Audio Devices tab
p
a
g
e, click the Add o
p
tion, and choose the Unlisted or U
p
dated Driver
o
p
tion. Click the OK button.
4. Insert the PC-DVD installation CD and follow the instructions for each screen to com
p
lete the
installation.
Dvd-fm.book Page 18 Thursday, December 17, 1998 9:44 AM