Filter
Top Products
Crestron CNX-PVID8x4 Professional Video Distribution Switch
Operations Guide - DOC. 8166A Professional Video Distribution Switch: CNX-PVID8x4 • 23
CNX-PVID8x4- “Device Settings” Window
NOTE: SIMPL Windows automatically changes Net ID values of a device added to a
program if a duplicate device or a device with the same default Net ID already exists in
the program. Always ensure that the hardware and software settings of the Net ID
match. For Net ID hardware setting details, refer to “Identity Code” on page 9.
CNX-PVID8x4 Symbols
The inputs to the CNX-PVID8x4 symbol require the analog equivalent (typically 1
through 16, but could go up to 32) so that the video source physically connected to a
given input can be switched to the specified output. In SIMPL Windows, the
following Analog Initialize logic symbol (decimal format) should be used to provide
these analog inputs.
Detail View of the Analog Initialize Symbol
NOTE: The "0d" indicates no source.
Depending on how the four boards of the CNX-PVID8x4 are cabled and/or
jumpered, the unit can be used in different hardware configurations. The diagrams in
the next three sections show three CNX-PVID8x4 symbol designations that are
available in SIMPL Windows. A table accompanies each diagram and lists the inputs
and their functional descriptions.
Symbol Designation: CNX-PVID8x4
There is no cabling of boards or jumper removal for this symbol designation.