Crestron electronic TPS-12G-QM Computer Monitor User Manual


 
Isys
®
G-Series Touchpanels Crestron TPS-12G/15G/17G-QM
QM Network Topology
TPS-12G/15G/17G-QM
QM-TX
QM
QM
QM
QM
QM
Origination Points Endpoints
QM
Midpoints
QM-FTDC
QM-MD7x2QM-MD7x2
QM-WMC
TPS-12G/15G/17G-QM
The TPS-12G/15G/17G-QM is not a switcher, but a transmitter/endpoint. Therefore,
even when designated as the endpoint from two midpoint switchers, the QM output
of the TPS-12G/15G/17G-QM can become another transmitter sending RGB video
at the touchpanel’s native resolution and aspect ratio. Refer to the following
illustration.
QM Network Topology with TPS-12G/15G/17G-QM Acting as an Endpoint and a Transmitter
QM-WMC
QM-WMC
QM
QM
QM
Origination Points
QM
Endpoints
TPS-12G/15G/17G-QM
This QM-RMCRX-BA does
not violate the two-midpoint
rule as it is receiving an
RGB signal from the
TPS-12G/15G/17G-QM
transmitter.
QM-RMCRX-BAQM-MD7x2 QM-MD7x2
QM
Midpoints
This TPS-12G/15G/17G-QM
acts as both an endpoint for
signals from the QM-WMC
origination points AND a QM
transmitter to the
QM-RMCRX-BA.
22 Isys
®
G-Series Touchpanels: TPS-12G/15G/17G-QM Operations Guide – DOC. 6415B