UP425
Guaranteed Uninterruptible Power System
2. As to Connected Equipment, the Power Control Guarantee covers only damage within
the specific terms of the Power Control Guarantee to Connected Equipment (and only up
to the applicable aggregate ceiling amount).
3. The Power Control Guarantee does not cover damage to Connected Equipment or
apply if the Product has been operated in a failure mode or not in compliance with
CyberPower operating instructions and manuals, or if the Connected Equipment has
been operated in a failure mode or not in compliance with the instructions and manuals
of its manufacturer/vendor.
The Limited Warranty and the Power Control Guarantee Do Not Apply Unless The
Initial Customer:
1. Has properly connected the Product and the Connected Equipment to properly wired
and grounded outlets (including compliance with electrical and safety codes of the most
current electrical code (ANS/NFPA 70), without the use of any adapters, extension cords
of other connectors.
2. Has provided a suitable and proper environment for use and installation of the Product
and Connected Equipment.
3. Has properly installed and operated the CyberPower Product and Connected
equipment.
4. Has operated the Product at all times within the limitations on the Product’s VA
capacity as stated in this User Manual.
CyberPower Does Not Cover or Undertake Any Liability in Any Event for Any of the
Following:
1. Loss of or damage to data, records, or software or the restoration of data or records,
or the reinstallation of software.
2. Damage from causes other than AC Power Line Transients, spikes, or surges on
properly installed, grounded and code-compliant 120 volt power lines in the United
States and Canada; transients, surges or spikes on standard telephone land lines, PBX
telephone equipment lines or Base 10T Ethernet lines, when properly installed and
connected. (This exclusion applies, for example, to fluctuations in data transmission or
reception, by CATV or Therefore transmission or fluctuations, or by transients in such
transmission.
3. Damage from any circumstance described as excluded above with respect to the
product.
4. Damages from fire, flood, wind, rain, rising water, leakage or breakage of plumbing,
abuse, misuse or alteration of either the product or the Connected Equipment.
Exclusion of Consequential and Other Damages.
The sole and exclusive remedies of the Initial Customer are those provided by the Limited
Warranty and Power Control Guarantee. CyberPower excludes any liability for personal
injury under the Limited Warranty and Power Control Guarantee. CyberPower excludes any
liability for direct, indirect, special, incidental or consequential damages, whether for
damage to or loss of property [EXCEPT FOR (AND ONLY FOR) the specific limited
agreement of CYBERPOWER to provide certain warranty benefits regarding "Connected
Equipment" under the "CYBERPOWER Power Control Guarantee"], loss of profits,
business interruption, loss of information or data. NOTE: Some States or Provinces do not
allow the exclusion or limitation of incidental or consequential damages, so the above
limitation may not apply to you.
11