Filter
Top Products
21Chapter 4 Board and System Configuration
Cyclades-PC400 driver <version> <date> built <date>
PC400 #1, RAM at 0xMMMM, IRQn, 64 channels starting from port 0
PC400 #2, RAM at 0xMMMM, IRQn, 64 channels starting from port 64
etc.
STEP FIVE
Enable the ports of the Cyclades-PC400 as you would with any standard serial port. Edit /etc/inittab to enable
getty and configure the PPP/SLIP scripts.
The site www.netlinos.org (Documentation->Tutorials->Remote Access) has an example of how to set up a
digital RAS using the PC400 and the software package portslave.
At this point the installation of the board is complete.
Guided Examples for the Most Common Applications
This section provides detailed examples that can be used as models for similar applications. Turn to the ex-
ample that is closest to your application, read the explanations, and edit the configuration file with parameters
appropriate to your system. Note that these examples only show the configuration of the first interface. The
configuration of the second interface is identical.