Filter
Top Products
CYV15G0404DXB
Document #: 38-02097 Rev. *B Page 26 of 44
Maximum Ratings
Exceeding maximum ratings may impair the useful life of device.
These user guidelines are not tested.
Storage Temperature.................................. –65°C to +150°C
Ambient Temperature with
Power Applied ............................................ –55°C to +125°C
Supply Voltage to Ground Potential................–0.5V to +3.8V
DC Voltage Applied to LVTTL Outputs
in High-Z State.......................................–0.5V to V
CC
+ 0.5V
Output Current into LVTTL Outputs (LOW) .................60 mA
DC Input Voltage ...................................–0.5V to V
CC
+ 0.5V
Static Discharge Voltage..........................................> 2000 V
(according to MIL-STD-883, Method 3015)
Latch-up Current.....................................................> 200 mA
Power Up Requirements
The CYP(V)15G0404DXB requires one power supply. The
Voltage on any input or IO pin cannot exceed the power pin
during power up.
Operating Range
Range Ambient Temperature V
CC
Commercial 0°C to +70°C +3.3V ±5%
Industrial –40°C to +85°C +3.3V ±5%
CYV15G0404DXB DC Electrical Characteristics
Parameter Description Test Conditions Min. Max. Unit
LVTTL-compatible Outputs
V
OHT
Output HIGH Voltage I
OH
= − 4 mA, V
CC
= Min. 2.4 V
V
OLT
Output LOW Voltage I
OL
= 4 mA, V
CC
= Min. 0.4 V
I
OST
Output Short Circuit Current V
OUT
= 0V
[12]
, V
CC
= 3.3V –20 –100 mA
I
OZL
High-Z Output Leakage Current V
OUT
= 0V, V
CC
–20 20 µA
LVTTL-compatible Inputs
V
IHT
Input HIGH Voltage 2.0 V
CC
+ 0.3 V
V
ILT
Input LOW Voltage –0.5 0.8 V
I
IHT
Input HIGH Current REFCLKx Input, V
IN
= V
CC
1.5 mA
Other Inputs, V
IN
= V
CC
+40 µA
I
ILT
Input LOW Current REFCLKx Input, V
IN
= 0.0V –1.5 mA
Other Inputs, V
IN
= 0.0V –40 µA
I
IHPDT
Input HIGH Current with internal pull down V
IN
= V
CC
+200 µA
I
ILPUT
Input LOW Current with internal pull up V
IN
= 0.0V –200 µA
LVDIFF Inputs: REFCLKx±
V
DIFF
[13]
Input Differential Voltage 400 V
CC
mV
V
IHHP
Highest Input HIGH Voltage 1.2 V
CC
V
V
ILLP
Lowest Input LOW voltage 0.0 V
CC
/2 V
V
COMREF
[14]
Common Mode Range 1.0 V
CC
– 1.2V V
3-Level Inputs
V
IHH
Three-Level Input HIGH Voltage Min. ≤ V
CC
≤ Max. 0.87 * V
CC
V
CC
V
V
IMM
Three-Level Input MID Voltage Min. ≤ V
CC
≤ Max. 0.47 * V
CC
0.53 * V
CC
V
V
ILL
Three-Level Input LOW Voltage Min. ≤ V
CC
≤ Max. 0.0 0.13 * V
CC
V
I
IHH
Input HIGH Current V
IN
= V
CC
200 µA
I
IMM
Input MID current V
IN
= V
CC
/2 –50 50 µA
I
ILL
Input LOW current V
IN
= GND –200 µA
Notes
12.Tested one output at a time, output shorted for less than one second, less than 10% duty cycle.
13.This is the minimum difference in voltage between the true and complement inputs required to ensure detection of a logic-1 or logic-0. A logic-1 exists when the
true (+) input is more positive than the complement (-) input. A logic-0 exists when the complement (-) input is more positive than true (+) input.
14.The common mode range defines the allowable range of REFCLKx+ and REFCLKx- when REFCLKx+ = REFCLKx-. This marks the zero-crossing between the
true and complement inputs as the signal switches between a logic-1 and a logic-0.
[+] Feedback [+] Feedback