Support User Manuals

Datalogic Scanning 7000 Scanner User Manual

Open as PDF

of 204

Linear Symbologies

Product Reference Guide 6-11

Code 93

< Default All Code 93 Settings >

Code 93 Enable

Code 93 Message Length

Scan the bar codes below to change the message length. Refer to Mes-

sage Length Description on page 6-2

for additional information. Mini-

mum and Maximum lengths = 0-80. Minimum Default = 0, Maximum

Default = 80.

Code 93 Code Page

Code pages define the mapping of character codes to characters. If the

data received does not display with the proper characters, it may be

because the bar code being scanned was created using a code page that is

different from the one the host program is expecting. If this is the case,

scan the bar code below, select the code page with which the bar codes

were created (see

Code Page Mapping of Printed Bar Codes on page A-7)

and scan the value and the

Save bar code from the Programming Chart on

page B-5

of this manual. The data characters should then appear prop-

erly.

* On

Off

Minimum Message Length

Maximum Message Length

Code 93 Code Page

previous next