Filter
Top Products
6-48 Magellan
®
9500
EAS Features
EAS Mode
This controls the mode of operation for interfacing with the Sensor-
matic
®
ScanMax Pro
TM
EAS device. Choices are:
• Disabled = EAS deactivation turned off.
• Coupled Mode = EAS tag is deactivated only upon successful scan-
ning of an item’s barcode or via manual push button.
• Decoupled Mode = EAS deactivation is performed independently of
barcode scanning.
• Hybrid Mode = EAS system is armed whenever the scanner is
enabled and the deactivation beep is sounded when an EAS tag is
deactivated.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
NOTE
Deactivation can only be initiated manually if the manual EAS deactivation
push button is armed to do so. Reference the feature, Manual EAS Deactiva-
tion Push Button for more information.