Filter
Top Products
DS4300 DATALOGIC
2.4
- Installation
The junction box is designed to be mounted to a panel of metal, plastic or
other appropriate material using the mounting screws provided in the
package. To do this:
1) Open the junction box by unscrewing the 4 cover screws.
If necessary, using the two mounting holes inside the junction box as a
pattern, mark the panel with an appropriate object and then drill two small
pilot holes in the panel.
2) Align the junction box and insert the two self-threading screws with their
washers and screw them into the panel until tight (see Figure 2.5).
Figure 2.5 - Junction box mounting