Filter
Top Products
DS4300 DATALOGIC
5.2
– Technical Features
SOFTWARE FEATURES
READABLE CODE SYMBOLOGIES
• EAN/UPC • Code 93
• 2/5 Interleaved • Code 128
• Code 39 • EAN 128
• Codabar • Pharmacode
CODE SELECTION
up to six codes during one reading phase
DECODING SAFETY
can enable multiple good reads of same code
HEADERS AND TERMINATORS
up to four headers and four terminators
OPERATING MODES
ON LINE
,
AUTOMATIC
,
SERIAL ON LINE
,
TEST
CONFIGURATION MODES
• through menus using WinHost utility
• receiving commands from one of the serial
ports (HOST MODE)
PARAMETER STORAGE
Non-volatile internal memory
ENVIRONMENTAL FEATURES
Operating temperature (Note 3)
0 to 40 °C (32 to 104 °F)
Storage temperature
-20 to 70 °C (-4 to 158 °F)
Humidity max. 90% non condensing
Vibration resistance IEC 68-2-6 test FC 1.5 mm;
10 to 55 Hz; 2 hours on each axis
Shock resistance IEC 68-2-27 test EA 30G;
11 ms; 3 shocks on each axis
Protection class IP65
PHYSICAL FEATURES
Mechanical dimensions 101 x 83.5 x 42 mm (3.97 x 3.29 x 1.65 in.)
Weight about 800 g. (28.2 oz.)
Note 1:
The features given are typical at a 25 °C ambient temperature (if not otherwise
indicated).
Note 2:
Further details given in paragraphs 3.3 and 3.4.
Note 3:
If the reader is used in high temperature environments (over 35 °C), use of the Beam
shutter is advised (for details refer to the WinHost Help On Line).