Filter
Top Products
DX6400
2
Mount the scanner using the ST-237 mounting bracket which assures an angle of 16°, as
indicated in the figure below, in order to obtain an angle of 90° between the two scan lines.
This guarantees an omni directional reading of the barcode, if the code label satisfies the
ACR™ 4 conditions (see par. 4.4 for details).
Figure 5 – Mounting Position
Refer to par. 4.5 for correct positioning of the scanner with respect to the reading zone and
scanner orientation. See par. "Scanner Direction" for scanner direction relative to the
conveyor.
2.2.2 Mounting the Scanner with Accessories
The following accessories allow installing the DX6400 reader in the most suitable position for
your network layout:
- ST-237 mounting bracket;
- FBK-6000 fast bracket.
The ST-237 is a 106° mounting bracket to be mounted on the reader as displayed in the
image below:
Figure 6 – Mounting the ST-237 Mounting Bracket
8