Datalogic Scanning DX6400 Scanner User Manual


 
DX6400
2
2.7.2 Test Mode
Test Mode is particularly advised during the installation phase, since it causes the reader to
be continuously activated allowing to verify its reading features and its reading position with
respect to the barcode.
To enter the Test Mode submenu and configure the scanner follow the given procedure:
1) Press and hold both the (up arrow) and (down arrow) keys for about 2 seconds to
enter the Main menu.
2) Use the (up arrow) or (down arrow) key to select the “Test Mode” item, then press
the ENT (enter) key to confirm. The reader enters Test Mode.
3) Press the (up arrow) key to exit the Test Mode.
4) Use the (up arrow) and (down arrow) key to select the “Exit” item, then press the
ENT (enter) key to confirm. The scanner exits the Main Menu and returns to its current
operating mode.
42