A SERVICE OF

logo

FORMULA™ QUICK REFERENCE GUIDE
19
3. Select <F2> to upload the data via the USB connection.
*SEND FILE*
F2=USB
F3=SERIAL
F4=EXIT
¤
During upload, Systools™ assumes the following statuses:
STATE: BUSY: appears while data is being uploaded.
STATE: CONNECTED: appears after the data is sent.
STATE: NOT CONNECTED: the device is not recognizable; check the cables.
NOTE 1: Click DISCONNECT or remove the terminal from the dock to end the data
transfer session.
NOTE 2: The collected .dat file data will be uploaded to the FILE NAME and PATH
settings selected earlier.