Filter
Top Products
DATALOGIC JET™
3
3.7.5 Ethernet Settings
Windows CE Ethernet cradle
Datalogic Jet™ can be connected to an Ethernet network by inserting it into the
Datalogic Jet™ Ethernet Multi Cradle.
NOTE
If the PDA supports Windows CE, ethernet communication requires
Datalogic Jet™ SW version 5.41 or later. Verify the software version
by tapping on Software – Version in the Datalogic default home
page. Otherwise, search for the file version.htm under the Windows
CE folder.
When correctly inserted into the Ethernet Multi Cradle, the Ethernet driver installed
on the mobile computer will automatically run, and using the DHCP service, will
dynamically assign the IP Address.
1. From the Datalogic Jet™ open Internet Explorer>Internet Options and check use
LAN no autodial then OK.
2. From the Datalogic Jet™ > Explorer, enter the IP address in the address bar (or
name), of the PC on the network that you want to communicate with. You may
be required to enter your network username and password. The LAN connection
will take place and you can see the PC shared folders.
You can download files from the PC to Datalogic Jet™ but not vice versa. To do this
use an FTP connection (see par. 3.8.3).
If your network provides Internet Service and does not use a proxy server you can
directly access the Internet. Otherwise set the internet proxy parameters according to
your network settings.
50