Filter
Top Products
16 I-Class
When finished with the self-tests, the LED blinks, and may blink again after
printer initialization is completed.
Amber LED – generally indicates job activity. When receiving print jobs
over the network, the amber LED blinks; it remains ‘Off’ during inactivity.
Error Conditions:
Combinations of blinking LEDs – 1 to 7 amber blinks followed by 1 to 12
green blinks – indicate various hardware failures. See the DMXNet
Resource Manual for more information.
;
Note: Following power-up the printer may indicate ‘READY.’ However, the
NIC Adapter will NOT be able to receive data until its boot-up process
(as denoted by the message ‘DMXNET INITIALIZING’) is complete.
This process may take up to two minutes.
USB Port (optional):
The USB Interface is supported under Windows
95/98/2000/ME/XP.
Depending upon the operating system of your host computer, installation may
differ slightly. Consult the additional documentation supplied with this option
for detailed information.
The USB Port is plug and play and operates transparently within the printer;
there are no menu-selectable settings or modes.
WARNING
The USB Port is a device-end only printer connection. Never
connect a keyboard, mouse, modem, etc. into this port. Damage
can result.