Filter
Top Products
60 I-Class
4.2 Display Messages
The printer displays several different types of information (if not in the menu
system or Quick Test Mode):
¾ User Prompts and Condition Messages (also see Section 4.1.1 for a listing
of the Enter/Exit Prompts)
¾ Application and Boot Loader Updating Messages (see Section 5.4 and 5.5)
¾ Fault and Warning Messages (see Section 6.1)
4.2.1 User Prompts and Condition Messages
User Prompts alert the operator to a required action. Condition Messages are
used to indicate an operational state.
User Prompts and Condition Messages
Displayed Message Description Condition(s)
!
DMFBSJOH!GBVMUT
The printer is trying to
clear a fault condition.
Occurs when the FEED
Key is pressed after the
correction of a fault.
DBMJCSBUJOH
A media calibration is
being performed.
The FEED Key was pressed
and held.
DBODFM!SFQSJOU@
FOUFS!LFZ!>!ZFT
The CANCEL or
TEST Key was pressed
during the fault
handling process.
The faulted label will be
cancelled if ENTER is
pressed, then the remaining
labels in the batch will be
printed.
DBODFM!CBUDI@
FOUFS!LFZ!>!ZFT
The CANCEL or
TEST Key was pressed
during a batch job.
The current print batch will
be cancelled if ENTER is
pressed; the remaining
labels will not be printed.
QBVTFE
The printer is paused
or offline.
The printer is in a paused
condition.