Dell 1150 Laptop User Manual


 
76 Adding and Replacing Parts
www.dell.com | support.dell.com
4
Press the lever next to the memory module connectors in the direction of the arrow on the
lever (towards the drive) to release the drive.
5
Pull the drive out of the bay.
6
Slide the new drive into the bay until the drive is fully seated.
7
Replace the screw that you removed in step 3.
8
Replace the memory module cover and screw.
Keyboard
1
Complete the instructions in "Before You Begin" on page 65.
2
Use a small flat-blade screwdriver or plastic scribe to lift the notched right edge of the hinge
cover, and pry the cover loose from the hinges and bottom case.
3
Lift the hinge cover up and away from the hinges and bottom case.
4
Remove the four keyboard screws.
NOTICE: The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace.
Be careful when removing and handling the keyboard.
5
Lift the keyboard out of the bottom case, and rest it on the display hinges so that the
keyboard connector is exposed.
hinge cover