Dell 1564 Laptop User Manual


 
Back to Contents Page
Camera Module
Dell™Inspiron™1564ServiceManual
Removing the Camera Module
Replacing the Camera Module
Removing the Camera Module
1. Follow the procedures in Before You Begin.
2. Remove the battery (see Removing the Battery).
3. Remove the display assembly (see Removing the Display Assembly).
4. Remove the display bezel (see Removing the Display Bezel).
5. Remove the display panel (see Removing the Display Panel).
6. Peel the camera module off the display cover.
7. Remove the tape that secures the camera cable to the camera module.
8. Disconnect the camera cable from the camera module.
Replacing the Camera Module
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on the back of the computer).
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the
computer.
NOTE: The color of the tape on the camera module may vary depending on your computer model.
1
display cover
2
alignment posts (2)
3
camera module
4
tape
5
camera cable