Filter
Top Products
1. Follow the procedures in Before You Begin.
2. Align the connectors on the USB/audio board with the slots on the computer base.
3. Use the alignment posts on the computer base to correctly place the USB/audio board.
4. Replace the screw that secures the USB/audio board to the computer base.
5. Slide the USB/audio cable into the connector on the USB/audio board, and press down on the connector latch to secure the cable.
6. Replace the palm rest (see Replacing the Palm Rest).
7. Replace the keyboard (see Replacing the Keyboard).
8. Replace the power button panel (see Replacing the Power Button Panel).
9. Replace the module cover (see Replacing the Module Cover).
10. Replace the optical drive (see Replacing the Optical Drive).
11. Replace the battery (see Replacing the Battery).
Back to Contents Page
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.