Filter
Top Products
Back to Contents Page
Display
Dell™Inspiron™1564ServiceManual
Display Assembly
Display Bezel
Display Panel
Display Panel Brackets
Display Hinges
Display Cable
Display Assembly
Removing the Display Assembly
1. Follow the procedures in Before You Begin.
2. Remove the battery (see Removing the Battery).
3. Remove the module cover (see Removing the Module Cover).
4. Disconnect the Mini-Card antenna cables (see step 4 in Removing the Mini-Card).
5. Note of the routing of the Mini-Card antenna cables and remove them from the routing guides on the bottom of the computer.
6. Remove the two screws on the bottom of the computer that secure the display assembly to the computer base.
7. Remove the power button panel (see Removing the Power Button Panel).
8. Remove the keyboard (see Removing the Keyboard).
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface.
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the
computer.
1
screws (2)
2
Mini-Card antenna cable routing