Filter
Top Products
To assign the TCP/IP address automatically using a DHCP or BOOTP server on your network, take the
following steps:
Press <Menu> until you see "Network Setup" on the bottom line of the display.1.
Press the scroll button ( or ) until "Configuration" displays on the bottom line. Press <Select>.2.
Press the scroll button ( or ) to display "TCP/IP" and press <Select>.3.
Press the scroll button ( or ) to display "DHCP" on the bottom line and press <Select>.4.
To assign the address from the BOOTP server, press <Select> when "BOOTP" displays on the bottom
line.
5.
Restoring the Network Configuration
You can return the network configuration to its default settings.
Press <Menu> until you see "Network Setup" on the bottom line of the display.1.
Press the scroll button ( or ) until "Clear Setting" displays on the bottom line.2.
Press <Select>.3.
The first available menu item, "Yes" displays on the bottom line.
Press <Select> to restore the network configuration.4.
Power the multi-function printer off and back on or reset the network interface card.5.
Resetting the Network Interface Card
You can reset the network interface card when a network problems occurs.
Press <Menu> until you see "Network Setup" on the bottom line of the display.1.
The first available item, "Reset NIC", displays on the bottom line.
Press <Select>.2.
The first available menu item, "Yes" displays on the bottom line.
Press <Select> to reset the network interface card.3.