A paper jam has occurred in the manual
feeder or the multi-function printer detects
improper feeding from the manual feeder.
Clear the paper jam. See page 164.
Load paper in the manual feeder
correctly. See page 25.
Your printer's memory is full and cannot
store the document to send a fax into its
memory.
To cancel the fax job, press the 1
button to accept "Yes."
If you want to send the pages that
were stored, press the 2 button to
accept "No." You should send the
remaining pages later when memory is
available.
The multi-function printer has a
communication problem.
Ask the sender to try again.
There is a problem in the fuser unit.
Unplug the power cord and plug it back
in. If the problem persists, please call
for service.
The delayed fax jobs are full.
Cancel the unnecessary delayed fax
job. For details, see page 137.
The loaded document has jammed in the
Automatic Document Feeder (ADF).
Clear the document jam. See page 162.
The front or rear cover is not securely
latched.
Close the cover until it locks into place.
You entered an unavailable item.
Enter the correct item again.
You have tried to use a combination of
printer functions that can not be used at
the same time.
Reduce the number of selected
functions or use only one function at a
time.
The group dial location you tried to select
has speed dial numbers assigned to it.
Press <Return> to start over with
another group dial location.
You have tried to select a group location
number where only a single location
number can be used, such as when adding
locations for a broadcasting operation.
Use a speed dial number or dial the
number manually using the number
keypad.
