Dell 1710 Personal Computer User Manual


 
1. Follow the instructions in Before Working on Your Computer.
2. Disconnect the antenna from the WLAN card (see Removing a WLAN Card).
3. Remove the hinge cover (see Removing the Hinge Cover).
4. Remove the keyboard (see Removing the Keyboard).
5. Remove the display assembly (see Removing the Display Assembly).
6. Remove the display bezel (see Removing the Display Bezel).
7. Remove the two M2.5 x 5-mm screws from the display hinges.
8. Lift the top edge of the display panel assembly away from the top cover.
9. Remove the eight M2 x 3-mm screws from the display panel.
Replacing the Display Panel
This procedure assumes that you have completed the removal procedure Removing the Display Panel.
1. Replace the eight M2 x 3-mm screws in the display panel.
2. Position the display panel assembly in the top cover.
3. Align the guide pins at the top of the display hinge panels and position the display panel in the top cover.
4. Replace the two M2.5 x 5-mm screws in the hinges.
5. Replace the display bezel (see Replacing the Display Bezel).
6. Replace the display assembly (see Replacing the Display Assembly).
7. Replace the keyboard (see Replacing the Keyboard).
8. Replace the hinge cover (see Replacing the Hinge Cover).
9. Reconnect the antenna to the WLAN card (see Replacing a WLAN Card).
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1
M2.5 x 5-mm screws (2)
2
M2 x 3-mm screws (8)
3
display panel
4
top cover
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.