Filter
Top Products
37
Solving Problems
If the touch screen starts losing its
sensitivity — The touch screen may have
foreign particles (such as sticky notes) that are
blocking the touch sensors. To remove these
particles:
Turn off the computer.1.
Disconnect the power cord from the wall outlet.2.
CAUTION: Do not spray water or a cleaning
liquid directly on the touch screen.
Use a clean, lint-free cloth (can spray mild, 3.
non abrasive cleaner or water on a cloth
if needed, but not on the screen) and wipe
the surface and sides of the touch screen to
remove any dirt or fingerprints.
Beep Codes
Your computer might emit a series of beeps during
start-up if there are errors or problems. This
series of beeps, called a beep code, identifies a
problem. Write down the beep code and contact
Dell (see “Contacting Dell” on page 63).
Series of beeps
(Beep code) Possible Problem
One Possible motherboard
failure - BIOS ROM
checksum failure
Two No RAM detected
Three Possible motherboard
failure - Chipset error
Four RAM read/write failure
Five Real Time Clock failure
Six Video card or chip failure
Seven Processor failure
Eight Display failure