Dell 225-4201 Computer Monitor User Manual


 
Electrical Specifications
Video input signals
Analog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm input impedance
Digital DVI TMDS, 600mV for each differential line, positive polarity at 50 ohm input impedance
DP1.2/HDMI1.4 signal input support
Synchronization input signals TTL levels required and separate syncs (including Trigger points), SOG (Composite SYNC on green)
AC input voltage/frequency/current 100 VAC to 240 VAC / 50 Hz or 60 Hz +
3 Hz / 1.5 A (Typical)
Inrush current
120 V : 30 A (Max)
240 V : 60 A (Max)
Physical Characteristics
Connector type
15-pin D-sub miniature, blue connector; DVI-DL, white connector; HDMI/
DP(in)/DP(out)/mDP, black connector
Signal cable type
DVI: Detachable, DVI-DL, Solid pins, shipped detached from the monitor
Analog: Detachable, D-Sub, 15 pins
DisplayPort: Detachable, DisplayPort, Solid pins
Mini-DP to DP: Detachable, DisplayPort, Solid pins, shipped detached from the monitor
High Definition Multimedia Interface: Detachable, HDMI, 19 pins
Dimensions (with stand)
Height (extended)
487.0 mm (19.17 inches)
Height (compressed)
358.7 mm (14.12 inches)
Width
699.8 mm (27.55 inches)
Depth
194.2 mm (7.65 inches)
Dimensions (without stand)
Height
317.0
mm (12.48 inches)
Width
699.8 mm (27.55 inches)
Depth
61.2 mm (2.41 inches)
Stand dimensions
Height (extended)
401.2 mm (15.80 inches)
Height (compressed)
358.1 mm (14.10 inches)
Width
288.0 mm (11.34 inches)
Depth
194.2 mm (7.65 inches)
Weight
Weight with packaging
11.35 kg(25.02 lb)
Weight with stand assembly and cables
8.34 kg (18.39 lb)
Weight without stand assembly
(For wall mount or VESA mount considerations - no cables)
5.76 kg (12.70 lb)
Weight of stand assembly
1.95 kg (4.30 lb)
Front Frame Gloss
Dell Standard Black
(Low Gloss 17+/-3gu)