Filter
Top Products
NOTE: Noise Reduction is only available for Multimedia, Game and Movie modes.
Pixel Clock The
Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference.
Use the
or to adjust for best image quality.
Phase If
satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase (fine),
again.
NOTE: Pixel
Clock and Phase Adjustments are only available for "VGA" input.
Dynamic
Contrast Dynamic Contrast adjusts the contrast ratio to 2,000,000 : 1.
Push the
button to select the Dynamic Contrast "On" or "Off" .
NOTE: Dynamic Contrast provides higher contrast if you choose Game mode and Movie mode.
Uniformity
Compensation
Select
screen brightness and color uniformity compensation settings.
Uniformity
Compensation adjust different areas of the screen with respect to the center to achieve uniform brightness and color over the
entire screen. For optimal screen performance, Brightness and Contrast for some preset modes (Standard, Color Temp) will be disabled
when Uniformity Compensation is turned on. When Uniformity Compensation is turn on, Energy Smart cannot be activated.
NOTE: User
is advised to use factory default brightness setting when Uniformity Compensation is turned on.
For
other brightness level setting, the uniformity performance may deviate from the data shown on the Factory Calibration Report.
Smart
Video
Enhance
Press the
key to select the Smart Video Enhance "Movie" or "Advance" or "Off".
Smart Video Enhance automatically detects video(motion) in any window on the screen, and applies enhancements to the video. Only the
video window is enhanced. Two different enhancement setting is available:
Movie - suitable for movie or multimedia video clips.
Advance - User adjustable setting.
NOTE: Smart Video Enhance (SVE) enhances one of the video windows (typically the largest), if multiple video windows are active on the
screen.
NOTE: Smart Video Enhance is not available for "VGA" (Analog) input and in Game Preset mode.
Display
Info Displays the monitor's current settings.
Reset
Display
Settings
Select this option to restore default display settings.
PBP Settings
This function brings up a window displaying image from another input source. Thus you can watch two images from different sources at the
same time.
Right-
Window
(select from input
Source)
Left –window (select from PBP source)
VGA DVI min-DP DP HDMI
VGA √ √ √ √
DVI √
√ √ X
min-
DP √ √
X √
DP √ √ X
√
HDMI √ X √ √