Filter
Top Products
Solving Problems 43
Network Problems
IF YOU CONNECTED THE MOUSE AFTER TURNING ON THE COMPUTER,
REMOVE THE POWER CABLE, AND THEN RECONNECT THE MOUSE
CABLE — If the mouse is connected after the power is turned on, the mouse
appears to be nonfunctional. To make the mouse function properly:
1 While your computer is on, remove the power cable from the back of the
computer.
2 Connect the mouse to the computer.
3 Reconnect the power cable.
4 Turn on your computer.
Pressing the power button does not clear the computer’s settings and does not
restore mouse functionality.
CHECK THE MOUSE CABLE —
• Check the cable connector for bent or broken pins and for damaged or frayed
cables. Straighten bent pins.
• Ensure that the cable is firmly connected to the computer.
TEST THE MOUSE — Connect a properly working mouse to the computer, and
try using the mouse. If the new mouse works, the original mouse was faulty.
CHECK THE MOUSE SETTINGS —
1 Click the Start button, click Control Panel, and then click Printers and Other
Hardware.
2 Click Mouse.
3 Try adjusting the settings.
REINSTALL THE MOUSE DRIVER — See page 59.
CHECK FOR INTERRUPT REQUEST CONFLICTS — See page 58.
CHECK THE NETWORK CABLE CONNECTOR — Ensure that the network
cable is connected as shown on page 21.