Filter
Top Products
Appendix 85
Memory
Architecture SDRAM
Memory connectors two
Memory capacities 128-, 256-, or 512-MB
Minimum memory 128 MB
Maximum memory 1 GB
Memory type PC133 SDRAM (non-ECC)
Drives
Externally accessible two 5.25-inch bays
one 3.5-inch bay
Internally accessible one bay for 1-inch–high IDE hard drive
Ports and Connectors
Externally accessible:
Serial 9-pin connector; 16550C-compatible
Parallel 25-hole connector (bidirectional)
Video 15-hole connector
Keyboard 6-pin mini-DIN connector
Mouse 6-pin mini-DIN connector
USB two front-panel and four back-panel USB
2.0–compliant connectors
Audio three back miniature connectors for line-in,
line-out, and microphone; one front
miniature connector for line-out
Internally accessible:
Primary IDE channel 40-pin connector on PCI local bus
Secondary IDE channel 40-pin connector on PCI local bus
Floppy drive 34-pin connector
Video
Video controller Intel integrated AGP graphics*
*Integrated AGP graphics uses a maximum of 32 MB of main memory.