Filter
Top Products
78 Adding Parts
www.dell.com | support.dell.com
HINT: Some computers
come with only two extra
alignment screws; others
come with four. You only
need two alignment
screws for this procedure.
10
Gently slide the drive into place.
11 Once the drive is in place, apply pressure to ensure the drive is fully
seated.
12 Use the securing screw that came with the drive to attach the drive to
the computer.
CAUTION: Match the colored strip on the cable with pin 1 on the
drive (pin 1 is marked as "1").
13
Connect the power cable to the system board.
14 Locate the data cable from the CD or DVD drive in the upper drive
bay and connect its middle data connector to the new drive.
15 Check all cable connections, and then fold the cables out of the way to
provide airflow for the fan and cooling vents.
drive
alignment screws (2)
securing
screw
extra alignment
screws (2 or 4)