Filter
Top Products
Toner is in the paper path.
Try the following:
Replace the toner cartridge.
Replace the fuser
2
.
Call for service.
Toner rubs off the paper easily when you handle the sheets.
The Paper Texture setting is wrong for the type of paper or specialty media you are using.
The Paper Weight setting is wrong for the type of paper or specialty media you are using.
The fuser
2
is worn or defective.
Try the following:
Ensure that the Paper Texture setting matches the paper loaded in the tray.
Change the Paper Weight setting to the appropriate weight.
Replace the fuser
2
.
Print density is uneven.
The toner cartridge is defective.
Replace the toner cartridge.
Ghost images appear on the page.
The Paper Type is set incorrectly.
The toner level is low.
Try the following:
Ensure that the Paper Type setting matches the paper loaded in the tray.
Replace the toner cartridge.
Print only appears on one side of the page.
The toner cartridge is not properly installed.
Remove and reinsert the toner cartridge.
Margins are incorrect.
The Paper Size is set incorrectly.