Solution Guide 25
NOTE: If you see a fatal error (Figure 18), double check that no other USB-based
storage devices are connected to the system and that the virtual media devices
present on the DRAC have been disabled, (see Appendix D: Modifying Remote
Access Console Virtual Media Status).
7
Once the recovery process completes, press ENTER to reboot your server.
The server will reboot and launch the VMware ESX Server 3i software. If
this does not happen, you will need to reassign order of your boot devices
placing the internal storage highest in the boot order list. Consult your
server’s manual for these steps.
8
Set the correct licensing mode as instructed in the Solution Licensing
section.
Figure 17. Beginning Recovery Process Figure 18. Error, other devices found