Filter
Top Products
Solution Guide 31
Figure 19. Network Adapter Selection Screen
3
Press <ESC> to return to the main network configuration screen
(Figure 10).
Set Host Name, IP address, Subnet Mask, Default Gateway, and VLAN ID
1
With the main management network screen displayed (see Figure 10),
scroll and select “VLAN (Optional)”.
2
Enter your desired management VLAN ID. If you know that you need to
use a specific VLAN ID, make sure your network connection/uplink is not
already tagging at the local switch. Specifying a VLAN ID in the ESX
software and at your network switch will lead to double VLAN ID tagging,
which typically leads to a loss of connectivity of your ESX server. If you do
not know your VLAN ID, it is best to leave this field blank. Once set, press
<ESC> to return to the main network configuration screen.