Filter
Top Products
32 Solution Guide
3
Next, from the main network configuration screen (Figure 10), select “IP
Configuration”.
4
Scroll down to “Set static IP address” line, and press SPACE to select.
Enter your IP address, subnet mask, and gateway. Press ESC to exit this
screen.
NOTE: Although your new settings will be shown on the main network
configuration screen, they will NOT take effect until you exit this screen by
pressing <ESC> again. You may do this now if your settings are complete;
however, most users will need to continue below to enter your network’s DNS
settings.
Figure 22. Configure DNS Settings
Figure 20. Configure VLAN ID Setting Figure 21. Configure IP Settings