Filter
Top Products
3 Remove the extra disks.
4 Connect the power cord to a properly grounded outlet.
5 Turn the printer back on.
58 Too many flash options installed
Too many optional flash memory cards or too many optional firmware cards are installed on the printer.
Try one or more of the following:
• Press the up or down arrow button until Continue appears, and then press to clear the message and
continue printing.
• Remove extra flash options:
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Remove extra flash options.
4 Connect the power cord to a properly grounded outlet.
5 Turn the printer back on.
58 Too Many Trays Attached
• Turn the printer off.
• Unplug the power cord from the wall outlet.
• Remove the excess trays.
• Turn the printer back on.
59 Incompatible Duplex
Only options designed specifically for this printer are supported.
Try one or more of the following:
• Remove the duplex unit.
• Press the up or down arrow button until Continue appears, and then press to clear the message and
continue printing without using the duplex unit.
59 Incompatible envelope feeder
Only options designed specifically for this printer are supported.
Try one or more of the following:
• Remove the envelope feeder.
• Press to clear the message and continue printing without using the envelope feeder.
59 Incompatible output bin <x>
Only options designed specifically for this printer are supported.
Troubleshooting
166