Dell 610 Computer Accessories User Manual


 
Removing and Replacing Parts 4-1
&+$37(5
5HPRYLQJDQG5HSODFLQJ3DUWV
This chapter provides procedures for removing the components, assemblies,
and subassemblies in the Dell Precision 610 mini tower systems.
Unless otherwise noted, each procedure assumes the following:
You have performed the steps in “Precautionary Measures” found later in
this chapter.
You have removed the computer cover.
You can replace or reinstall a part by performing the removal procedure in
reverse order unless additional information is provided.
5HFRPPHQGHG7RROV
Most of the procedures in this chapter require the use of one or more of the
following tools:
Small flat-blade screwdriver
Wide flat-blade screwdriver
#1 and #2 Phillips-head screwdrivers
1/4
-inch nutdriver
Tweezers or long-nose pliers
Also, use a wrist grounding strap as explained in the next section, “Precaution-
ary Measures.”