Filter
Top Products
Removing and Replacing Parts 4-9
&RQWURO3DQHO
To remove the control panel, follow these steps:
Note the routing of the control panel cable as you remove it from the
chassis. It is important to route the cable properly when you replace it to
prevent it from being pinched or crimped.
Open the drive cage door, pull the control panel cable through the opening
in the front wall, and carefully remove the cable from the routing tab in the
drive cage door.
control panel
control
panel cable
mounting
screw
thermal sensor
cable
connector
chassis intrusion switch
cable connector
speaker cable
connector