Filter
Top Products
4-4 Dell Precision 610 Mini Tower Systems Service Manual
Before you reinstall the cover, fold all cables out of the way so that they do not
interfere with the cover or with the proper airflow inside the computer.
When you boot the system, you will need to reset the chassis intrusion detec-
tor by entering the System Setup program and changing the Chassis Intrusion
setting to Not Detected. See Appendix A for information on the System Setup
program. If you need further information, see Chapter 3, “Using the System
Setup Program,” in the
User’s Guide
.
NOTES: After removing and replacing the cover, the chassis intrusion detector
will cause the following message to be displayed at the next system start-up:
ALERT! Cover was previously removed.
If a setup password has been assigned by someone else, contact the network
administrator for information on resetting the chassis intrusion detector.