4-20 Dell Precision 610 Mini Tower Systems Service Manual
6\VWHP%RDUG&RPSRQHQWV
The subsections that follow contain procedures for removing system board
components, which are shown in Figure 4-17.
PCI expansion-card
connectors (PCI1-PCI5)
CD-ROM drive audio
interface connector (CD-IN)
serial port connectors
(SERIAL 1/2) (stacked)
parallel/SCSI port connectors
(PARALLEL/SCSI) (stacked)
secondary diskette-drive interface
connector (DISKETTE)
(pin-1 corner)
front of
computer
secondary EIDE interface
connector (IDE2) (pin-1 corner)
battery socket (BATTERY)
primary EIDE interface
connector (IDE1) (pin-1 corner)
NIC connector (ENET)
configuration jumpers
processor fan
connector (FAN)
line-out jack (LINE-OUT)
line-in jack (LINE-IN)
microphone jack (MIC-IN)
control panel
connector (PANEL)
mouse/keyboard connectors
(MOUSE/KYBD) (stacked)
main power
input connector
(POWER1)
primary Slot 2 SEC
cartridge connector (SLOT2_PRI)
DIMM sockets
(DIMM_A-DIMM_D)
secondary Slot 2 SEC
cartridge connector (SLOT2_SEC)
USB connectors (USB)
secondary SCSI connector
(SCSI_NARROW)
primary SCSI connector
(SCSI_ULTRA2)
AGP expansion-card connector (AGP)
Wakeup On LAN
card connector (LAN)
hard-disk drive access indicator
connector (AUX LED)
diskette-drive interface
connector (DISK2)
RAID connector (RAID)
ISA expansion-card connector (ISA1)
power LED
standby LED
modem connector (MODEM_IN)
SPREAD
jumper
CPU mismatch LED