Filter
Top Products
Adding and Replacing Parts 107
NOTICE: If you need to install memory modules in two connectors, install a
memory module in the connector labeled “JDIM (DIMMA)” before you install
a module in the connector labeled “JDIM2 (DIMMB).”
8
Ground yourself and install the new memory module:
HINT: If the memory
module is not installed
properly, the computer
does not boot. No error
message indicates this
failure.
a Align the notch in the module with the slot in the center of the
connector.
b Slide the edge of the module firmly into the connector, and rotate
the module down until you feel a click. If you do not feel the click,
remove the module and reinstall it.
9 Replace the cover and screw(s).
NOTICE: If the memory module cover is difficult to close,
remove the module and reinstall it. Forcing the cover to close
may damage your computer.
memory
module
securing
clip
1H018bk3.book Page 107 Monday, October 14, 2002 2:26 PM